rnl
Posts: 8
Joined: 7/5/2005 Status: offline
|
I just found and instruction for a camry and it worked on my camry. I also have a 2000 ES300, which should work too since it's look/work the same. It's up to you if you want to try it or not. 1- Stick the key in and turn to ON position. 2- click the odometer/trip meter reset pin to odometer and make sure you can see the odometer (the actual miledge of your car, not the trip meters). 3- Turn key to off position 4- press and hold the odometer reset pin 5- turn key to ON position, still hold in the odometer reset pin. You will see the degits on the meter became "--------". Each dash will be blinking and disappeared one by one untill all are done. 6- turn off the key and try to start your car. You should see the maintenant req light went away.
|